Specification
Features:
Complied with Flex ATX and ATX12V standard
Active Power Factor Correction Meeting with EN61000-3-2
High efficiency and reliability
Remote On/Off function
Internal 12V DC fan included
Noise Killer (Thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
Input:
Voltage: 90~264V AC, Full Range Input
Frequency: 47 ~ 63Hz
Input current: 4A (RMS) @115V AC, 2A (RMS) @230V AC
Inrush current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
Hold-up time: 17ms minimum at nominal input voltage
Dielectric withstand: Input to frame ground 1800V AC for 1 second
Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Dimension (WxLxH): 3.2 x 6 x 1.6 inches / 81.5 x 150 x 40.5 mm
Mfr Part Number: FSP200-50PLAR-B
 |
|
|
0 items
